A corrosion inhibitor is a chemical added to produced fluids to slow corrosion of the steel they touch. In oil wells, most of it is filming amine: a nitrogen compound that sticks to the tubing and rods and keeps the produced water off the metal. It only works if it reaches every surface at a high enough concentration, and that depends on how it’s applied. Whether a program is working is a measurement question, answered with coupons, iron counts and, best of all, the condition of the tubing when it comes out of the hole.
How corrosion inhibitors work
Wikipedia defines a corrosion inhibitor as something “added to a liquid or gas to decrease the corrosion rate of a metal that comes into contact with the fluid.” It’s an additive to the fluid. A coating or a plating is a different kind of protection.
SPE’s PetroWiki sorts oilfield inhibitors into three groups:
| Type | Examples | How it works | Oilfield use |
|---|---|---|---|
| Neutralizing | Amines, ammonia, morpholine | Takes up hydrogen ions, one molecule of inhibitor per molecule of acid | Minimal |
| Scavenging | Oxygen scavengers | Removes the corrodant from the fluid | Common in water injection |
| Film-forming (“filming amines”) | Nitrogen-containing organic compounds | Adsorbs on the steel and forms a barrier, possibly only a few molecules thick, that can leave the surface oil-wet | Most of what’s used in production |
PetroWiki adds that the film can also bind to the corrosion product on the steel, making it stick better and let less through. Those layers can be much thicker than a few molecules. The chemistry varies, but the inhibitor has to touch the metal in every case.
Scavengers have a limit worth knowing. PetroWiki notes that oxygen scavengers can leave small amounts behind, around 20 ppb, and that can still be enough to cause corrosion.
What drives the need: water, CO2 and H2S
Corrosion needs water. PetroWiki explains that iron corrodes through an electrochemical reaction, and the ions involved can only move through water. In production wells the usual corrodants are CO2 (sweet corrosion), H2S (sour corrosion) and oxygen brought in by injection or workover fluids. PetroWiki says inhibitors and corrosion-resistant alloys are both effective against sweet corrosion. Our guide to CO2 corrosion in Permian tubing covers why West Texas tubing sees so much of it.
Water cut matters most in rod-pumped wells. A Southwestern Petroleum Short Course paper by Wallace Frank of Exxon reports that corrosion problems in rod-pumped wells were directly related to the water cut. Severe problems, measured by rod, pump and tubing failures, were mostly in wells making more than 30% water. The same paper says H2S in the produced fluids sped up embrittlement and pitting, which shortened rod life and led to fatigue failures.
Crude oil chemistry also changes the picture. PetroWiki describes lab tests where steel corroded at 0.6 mil/yr in one crude and 26 mil/yr in another under the same conditions. Its conclusion is that ignoring crude chemistry costs money through overtreating or buying more expensive alloys than the well needs.
How inhibitor gets downhole: batch, continuous and squeeze
PetroWiki lists the usual delivery methods:
| Method | How it works | Notes from the sources |
|---|---|---|
| Tubing displacement (batch) | Inhibitor fluid pushed down the tubing, top to bottom | Film lasts days to months depending on the well |
| Annulus displacement (batch) | Inhibitor pushed from the annulus up across the tubing | Same film life range |
| Continuous injection | Inhibitor fed all the time through a “macaroni string” to the perforations, or down the annulus | Valves in the injection system can plug |
| Squeeze | Inhibitor pumped into the formation and produced back slowly | The first returns coat the tubulars; later returns repair holes in the film |
| Weighted liquids, capsules or sticks | Inhibitor dropped into the rathole and released slowly | Continuous release without an injection string |
| Vapor-phase | Volatile inhibitor that migrates through a space | Used for dead legs and low-flow areas |
Frank’s paper names four methods for rod-pumped wells: squeeze, batch flush, continuous injection and circulation. It says the film can be kept up by holding enough inhibitor in the produced fluids, or made by a short contact with a strong concentration and renewed by retreating often. Frank defines the “best” method as the cheapest once well servicing costs and chemical costs are both counted.
PetroWiki makes the same economic point about chemicals versus alloys. The choice comes down to capital against operating cost, and it should count downtime and deferred oil from repeated trips to treat the well.
One exception: filming amines generally don’t protect against stimulation acids or spent acid flowing back, according to PetroWiki. Acid jobs carry their own inhibitors mixed into the acid.
Scale and corrosion inhibitors together
PetroWiki notes that corrosion inhibitors often use the same delivery techniques as scale inhibitors, but the chemicals and the way they work are different. If a well gets a combined product, check that the corrosion side is dosed for the water the well makes now, not the water it made when the program was set up.
How to prove an inhibitor program is working
A 1990 Oil & Gas Journal series by Douglas Moore and Harry Byars of ARCO laid out the field methods.
Corrosion coupons
A coupon is a weighed piece of metal left in the system to corrode. Moore and Byars call coupons the most common monitoring method and say they should be exposed for at least one month unless corrosion is high and uncontrolled. Short exposures can mislead, because pitting takes time to develop. They say to report a pitting rate as well as the weight-loss rate, since pitting is the main form of attack in the oil field and its rate is usually the more telling one. Coupons from different suppliers aren’t comparable, so stick with one.
Iron counts
Corroding steel puts iron into the water. For downhole corrosion, the sample has to come from as close to the wellhead as possible, and it has to be tested right away or preserved, because the iron drops out of solution. The count has to be turned into iron production:
(ppm iron) × (barrels of water per day) × 0.000335 = pounds of iron per day
As plain arithmetic, a well making 200 barrels of water a day at 40 ppm iron loses about 2.7 lb of iron a day. Moore and Byars warn that a steady iron count while fluid production declines means the corrosion rate is going up. Their example plot shows iron readings falling and leveling off after low-volume batch inhibitor treatments began. They also say iron counts may not mean much in sour systems, because H2S and iron form iron sulfide and the readings jump around.
Corrosion probes
Electrical resistance probes give faster readings than coupons. Linear polarization (LPR) probes give real-time rates and are useful for comparing inhibitors, but they need a continuous water phase and conductive iron sulfide scale can mask them. Moore and Byars stress that a probe reports its own corrosion rate, not the pipe wall’s, so trends matter more than single readings.
All three are indirect. Each shows whether conditions are getting better or worse at the spot being measured.
Check the tubing when it comes out
The direct answer comes on the next pull. A scan of each joint shows where wall was lost, how deep the pits went and which joints are finished. Compared with the coupon and iron data, it shows whether the inhibitor film was reaching the whole string. Pitting is the common failure mode of sweet corrosion, according to PetroWiki, and our guide to pitting corrosion in oilfield tubing covers what it looks like and how fast it can go through a wall.
A short checklist for reviewing a program:
- Water cut and water analysis are current, and the dose is set for today’s water.
- Batch intervals or injection rates are written down and actually followed.
- Coupons stay in at least a month, come from one supplier and are reported with pitting rates.
- Iron is reported as pounds per day, sampled at the wellhead, with sour wells judged on other data.
- Every tubing pull gets a joint-by-joint inspection record to compare with the last one.
- Failures are logged by depth, so you can see whether they cluster where the treatment doesn’t reach.
EMI tubing inspection in the Permian Basin
Site Safe Solutions runs EMI inspection on production tubing at the wellhead or on the lease. The non-contact scan finds wall loss, rod wear, corrosion and other defects along each joint and produces digital trace records, so repeat scans of the same string show how fast it’s degrading. That record is a direct check on whether a corrosion inhibitor program is doing its job. The company describes itself as the only provider in the Permian Basin with ACE-Making technology. If a well is coming in for a workover, send us the tubing size and joint count and we’ll scan it while it’s on surface.